Wintv Hvr 1950 Drivers For Mac

WinTV v7 application and driver download package

WinTV external USB TV tuners. WinTV-quadHD USB. Xbox One TV tuner.

WinTV v7 installation package, version 3.9g
For Windows 8, 7, Vista and XP

File name: wintv7_cd_3.9g.exe
File size: 151.4 MB
Date: 02/12/2015

This download is a complete installation package, including drivers for supported WinTV products plus the WinTV v7 application and utilities.

Installation notes:

A valid WinTV application CD-ROM will be needed to install this WinTV v7 version. Any WinTV v6 or WinTV 7 application CD can be used during the install. If you do not have your original WinTV CD-ROM but would like to update to WinTV v7, you can purchase a new CD on the Hauppauge webstore

If you have a WinTV v7.2 CD-ROM with Extend, then the latest version of WinTV Extend will also be installed.

To install the WinTV v7 application update

  • Download the WinTV v7 installation package to your PC. After downloading this file, the file is normally saved in the Download directory on your PC
  • Run wintv7_cd.exe from the Download directory on your PC
  • Click Step 1. Install Drivers. This will install the WinTV Windows driver. At the completion of the driver install, you should see a message which says Drivers have been updated sucessfully.
  • Click Step 2. Install WinTV. This will install the WinTV v7 application, 'middleware', TV services and other necessary files.

This will complete the driver and application installation for your WinTV.

Release notes for WinTV v7:

  • Adds support for HD PVR 2 models 1573xx
  • Fixes an issue installing IR on drives with 2TB+
  • Fixes an issue which could cause scheduled recordings not to start after a reboot if the database had got too large
  • Updated translations
  • Adds support for HVR-1955/HVR-1975

The WinTV-HVR-1110 Windows driver can be used with all versions of Windows Media Center and other third party TV applications

Wintv Hvr 1950 Drivers For Mac Osx

WinTV-HVR-11xxx driver version 30031

Name:WinTV-HVR-1110_Driver_1_40_1_30031.exe
Version: 1.40.30031
Size: 1.44 MB

To install the latest Windows driver only:

Leave your WinTV-HVR-1110 plugged into your PC. Follow the following steps:

  • Download the WinTV-HVR-1110 driver update.
  • Run the exe file.
  • This will install the WinTV-HVR base driver. At the completion of the driver install you should see a message which says Drivers have been updated successfully.

WinTV Digital Signal Strength Indicator

The WinTV Digital Signal Strength indicator displays information about the quality of the digital TV channel you are watching. This application is used with the WinTV v6 and WinTV v7 applications.

Click here for instructions on using this application.

Software Encoder for Mediacenter plugin

Wintv hvr 1950 drivers

File Name: SoftMCE_Setup.exe
Size: 2.22 MB

Windows Media Center: Setting up an analogue terrestrial signal.

Windows Media Center: Setting up a digital freeview signal.

Windows Media Center: Setting up a Sky satellite set top box (Note: Windows Media Center Remote Control and IR receiver/blaster needed).

Prodinfo.exe is a program you can run which will extract information about the WinTV product you have installed such as model and serial number, MAC address, revision, and features which can be used to identify the exact model of your product. The driver for the device must be installed in order to run Prodinfo.exe

HCWCLEAR.exe is a program you run to remove all driver and files that were installed with the installation of the Wintv program.

Note: to use the WinTV-HVR-1250 or WinTV-HVR-1265 with the Windows Media Center application, click the Windows Media Center install tab above.

Note: If you have run HCWCLEAR, you must reboot your PC and leave the WinTV-HVR-1250 installed. After a reboot you will see the Found New Hardware Wizard installation message, hit Cancel. Then install the WinTV application.

WinTV v8

For installation information on WinTV v8, please click here.

WinTV v7

The WinTV-HVR-1250 was supplied with the WinTV v7 application for Windows.

For installation information on WinTV v7, please click here.

WinTV-HVR driver version 34237
For the WinTV-HVR-1200, -1250, -1260, -1270,
Win-HVR-1400, -1500, -1700, WinTV-HVR-1800 and -1850
Impact-VCBe

Name: driver85_1_59_35167.exe
Size: 12.8 MB
Updated: 08/24/2017

To install the latest Windows driver only:

Leave your WinTV-HVR plugged into your PC. Follow the following steps:

  • Download the Windows driver above.
  • Double click the downloaded driver. This will install the WinTV-HVR Windows driver.
  • At the completion of the driver install, you should see a message which says Drivers have been updated successfully.
  • At this point, the Windows driver will be installed.

SoftMCE Setup

File name: SoftMCE_setup.exe
File size: 2.3 Mb
Date: 4/14/2010

Setting up your TV tuner in Windows 7 Media Center

Bug fixes for the Windows Media Center 'Low bit rate' error message

Microsoft has released Windows Media Center patches for the 'Low bit rate' error message.
Click to view the information from Microsoft.

Remapping clear QAM channels in Windows 7 Media Center

WinTV Digital Signal Strength Indicator

The WinTV Digital Signal Strength indicator displays information about the quality of the digital TV channel you are watching. This application is used with the WinTV v10, 8 and v7 applications.

The WinTV Digital Signal Strength must be used with one of the Hauppauge WinTV applications. It cannot be used stand alone.

Click here for instructions on using this application.

IR Remote control application

Remote control applet. After you run this applet, an icon will appear in your Windows device tray showing that the Hauppauge remote control is active.

Name: 2.71.33113_IR32.exe
Size: 450KB
Updated: April /2015

WinTV-Scheduler update for WinTV version 6

This TV program scheduler for WinTV version 6 allows 'background recording' on dual tuner WinTV products.

Name: sched25_26071.exe
Size: 3.8 MB
Updated: March 11, 2008


Soft MCE driver

This file is required for analog TV in Windows Media Center.

Name: softmce_setup.exe
Size: 2.2 MB
Updated: 4/14/2010

Is a free Personal Video Recorder (PVR) and Media Centre application for Microsoft Windows.

SnapStream Beyond TV™ 4 : 'Proving that a PC can rival TIVO' !

  • Supports the latest Hauppauge TV tuners.
  • Record more than one show at the same time or watch one while recording another with multi-tuner support
  • Record an entire TV series Record one show, every episodes, or only new episodes of your favorite show
  • Enjoy the full screen interface Choose shows and setup recordings from the comfort of your couch
  • Easily find shows using the integrated Electronic Program Guide (EPG)
  • Record and watch HDTV shows with over-the-air HD support on the WinTV-HVR-1250
  • Skip commercials with SmartSkip
  • Find shows faster with the new browse by category feature, or search by title or keyword
  • No subscription fees
  • Schedule recordings away from home via the Internet or a web-ready phone
WinTV v10 Introduction
click to play video
Scheduled recording with the built-in EPG
in WinTV v10
click to play video
Wipe out your channel database and
rescan for channels
click to play video
WinTV v10 scheduling recordings with TitanTV
click to play video
How to setup an analog video source
Click to play video
How to setup an analog video source (channel 3)
Click to play video
How to scan for FM radio stations in WinTV
click to play video
How to change the battery in a
Hauppauge -005 remote control
click to play video

Here is a chart which shows some of the things you need to know about each type of connection.

Here are some common models (please order by model number or product code):

Connecting to an over-the-air antenna

Cable or satellite TV set top box
RF output

click to enlarge

Cable or satellite TV set top box
A/V output

Connecting to a cable TV wire from the wall (Digital QAM)

click to enlarge
Which type of TV can this connection be used with?Over-the-air TVCable or satellite TV boxCable or satellite TV boxCable TV
What types of video do I select when scanning for channels in the WinTV application (Device Setup Wizard)?Digital ATSCAnalog TV (cable/antenna)External inputs (S-Video or Composite video)Digital QAM or
Analog TV (if available in your WinTV tuner)
What remote control do I use to change channels?WinTV remote controlRemote control from your set top boxRemote control from your
set top box
WinTV remote control
NotesYou can use a roof top antenna for best reception.

Most set top boxes allow you to switch to Channel 3 or 4. When you scan with WinTV, it will pick up the TV signal on the correct channel.

Some satellite receivers use channels 60, 70 or 73. But when you scan for Analog TV channels, WinTV will pick up whatever channel is being used by your set top box.

Most set top boxes have A/V connections on the back, which can go into the WinTV's A/V input.

Some cable TV networks transmit analog TV channels, so we recommend scanning for both Clear QAM and analog TV.

Not all cable TV networks transmit clear QAM. Check with your local cable TV operator for the availability of clear QAM in your area.

What Operating Systems are supported by the WinTV-HVR-1250?

  • Microsoft® Windows® XP, XP Pro or Windows XP Media Center Edition, with Service Pack 2 (or greater)
  • Windows Vista (all versions), 32-bit and 64-bit
  • Windows 8 and 7 both 32 and 64 bit versions

System Requirements

  • Processor Requirements (minimum):
    • 2.2 GHz Intel P4 or equivalent
  • Microsoft Windows 7, Windows Vista or Windows XP with Service Pack 2.
    WinTV-HVR-1250 is Windows Vista Premium certified*
  • Available PCI Express X1 or X16 slot
  • Graphics with 64MB memory (or greater)
  • Sound card

Can I use the WinTV-HVR-1250 with Media Center?

Yes, the WinTV-HVR-1250 can be used in Windows XP MCE 2005, Vista Media Center or WIndows 7 Media Center.. Simply download and install the latest MCE Kit from the Hauppauge website, which will install the driver and necessary 'Hauppauge MCE Soft Encoder'. Under Windows 7 only the driver is required, the Soft Encoder is included with the OS.

Here is the link: mcekit_setup.exe

Please note: you will only be able to configure WinTV-HVR-1250 as either an Digital tuner or an Analog tuner. You will not be able to switch between Digital and Analog channels.

NOTE: You must set up an analog TV tuner in Media Center first before you can proceed to set up a digital tuner.

What type of channels will I receive with the WinTV-HVR-1250?

NTSC Analog CableTV or over-the-air analog TV: You can use your cable TV from the wall to connect to the WinTV-HVR-1250 and receive all of your basic Cable TV channels. You can also use a roof top antenna to receive 'over-the-air' TV.

Note: After June 2009, most areas in the United States no longer broadcast over-the-air analog signals.

ATSC over-the-air digital TV: Supports all ATSC formats, up to the high definition 1080i format!
Note: For ATSC digital TV, a rooftop/out door antenna is recommended for optimal results/signal strength.

ClearQAM cable TV Channels: Clear QAM digital cable TV channels are unencrypted digital cable TV channels. Clear QAM allows users to watch unencrypted digital TV channels from their cable TV provider without a set-top box.
Note: WinTV v7, WinTV v6, Microsoft Windows 7 or Windows TV Pack 2008 for Vista are required for clear QAM reception
Note: Check your local cable TV provider for clear QAM reception over your cable TV network.

Can I get HD with the WinTV-HVR-1150 through my Cable or Satellite box?

No. The WinTV-HVR-1150 has an ATSC over-the-air digital TV tuner built-in and supports all ATSC formats, up to the high definition 1080i format . The WinTV-HVR-1150 will support ATSC broadcasts that are currently being transmitted over-the-air. It will not be able to decode HD broadcasts that come through your cable or satellite box. The HVR 1250 also will support clear QAM cable TV channels through your direct cable TV line if available from your cable TV provider.

Can I get HD with the WinTV-HVR-1250 through my Cable or Satellite box?

No. The WinTV-HVR-1250 has an ATSC over-the-air digital TV tuner built-in and supports all ATSC formats, up to the high definition 1080i format . The WinTV-HVR-1250 will support ATSC broadcasts that are currently being transmitted over-the-air. It will not be able to decode HD broadcasts that come through your cable or satellite box. The HVR 1250 also will support clear QAM cable TV channels through your direct cable TV line if available from your cable TV provider.

What type of recordings can I make with the WinTV-HVR-1250?

Using the WinTV 7 application the WinTV-HVR-1250, will record in a transport stream (TS)
For ATSC and Clear QAM digital TV recordings, the recording format and bit rate is exactly the same as the broadcast format (i.e. ATSC 1080i is recorded at 1080i).
For NTSC analog cable TV recordings, our SoftPVR is used to create Transport Stream files (TS)

Note: TS files can be converted to MPEG files using options in the WinTV 7 configuration menu.

Note: The WinTV 6 application recording are in MPEG format for both digital and analog.

Note: Not all recordings made with ATSC/QAM signals are DVD compliant.

Can I record one show while watching another with the WinTV-HVR-1250?

No. The WinTV-HVR-1250 will only be able to record the program that is being viewed using the supplied software.

You will not be able to watch a digital channel and record an analog channel simultaneously or vice versa due to the fact there is only a single tuner on the WinTV-HVR-1250.

Black video window or choppy video when watching a digital TV channel

If you are watching a digital TV channel and you see choppy video, no audio or a black screen, then it is possible your PC is not fast enough to decode and play the digital TV channel you are watching. Please verify that your system meets the minimum requirements for using the WinTV-HVR-1250

Digital TV, especially ATSC high definition digital TV, is very CPU intensive. Many graphics cards have special built-in hardware to speed up decoding of high definition TV channels.

On graphics cards without special video decoding features, you can often improve the playback performance by using the Video Renderer settings located in the settings menu of WinTV 7. To open the setting menu click on the “gear” button located in the lower left of the WinTV 7 screen.

The default mode is EVR. The other modes are VMR9, VMR7 and Overlay. Each mode uses a different process to render video. Try each mode and use the one which gives you the best results. To use hardware acceleration put a check in the box “use hardware acceleration when possible. This will allow your graphics system to use hardware acceleration for video decode. Note: graphics hardware acceleration does not work on all systems. After making a change in video rendering settings Wintv must be restarted to take effect.

If you are using WinTV 6 then the render options are part of a separate program called Primary. Changes in the Primary applet must be made with the WinTV application closed. Open the Primary program by going to Start – All Programs – Hauppauge WinTV – Primary. After making changes close the Primary applet and open the WinTV application.

How do I enable my remote control so it will work with the WinTV-HVR-1250?

The IR software should be installed by default. To check look for a small remote control icon in the Windows task bar on the lower right. If it is not present you can reinstall Wintv from the installation CDROM or download IR32.EXE from our support web site. The remote control must also have “line of sight” with the WinTV-HVR-1250 IR sensor. Be sure that the IR cable is connected to the IR port on the back of the WinTV-HVR-1250 board (available on certain models only).

Can I use the WinTV-HVR-1250 with Linux?

Preliminary support for the HVR1250 in ATSC mode only is available from http://linuxtv.org/hg/v4l-dvb

I’m receiving a flickering video image using my WinTV product installed on a Gigabyte GA-MA790X-UD4P motherboard?

To correct the flickering video issue, from the BIOS, disable the 'C1E Support” option and restart the system.

I receive a 'Low bit rate' error message when using Windows Media Center in Windows 7.

Microsoft has released Windows Media Center patches for the 'Low bit rate' error message.
Click to view the information from Microsoft.

WinTV v7 does not open or opens and then disappears?

Wintv Hvr 1950 Drivers

This can be caused by a corrupt Channel database so you will need to uninstall and reinstall. First you need to go to start, all programs, Hauppauge Wintv and in that folder run
“uninstall Wintv7” (or remove Wintv7 using control panel 'add/remove programs) then you need to remove the backup channel database.

Wintv Hvr 1950 Drivers For Mac

Windows Vista, 7 and 8 go to C:program data ( this folder is a hidden folder so if you do not see it you need to “show hidden folders “ in your search
Options) once you can get to this folder you will see a folder label “Hauppauge” delete this folder.

Windows XP go to C:documents and settingsall usersshared documentsapplication data ( this folder is a hidden folder so if you do not see it you need to “show hidden folders “ in your search Options) once you can get to this folder you will see a folder label “Hauppauge” delete this folder.

Then download the latest version of Wintv7 located in the support section of the website and reinstall (note: you must have your original CD to validate the download.)

Windows cannot verify the digital signature for the drivers required for this device error code 52?

This appears to be a bug in windows 64 bit OS. Our drivers are signed.

'Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)'

The following is probably the easiest fix to Error Code 52 on Windows 7 or Windows 8 64bit.

In device manager right click the Hauppauge product under Sound Video and Game Controllers with the exclamation mark and select Uninstall.

On the Confirm window please check the box for 'Delete the driver software for this device' and click OK.

Once the drivers are gone on the top of Device Manager click on 'Scan for Hardware Changes'.

Windows should now look online automatically for drivers.

Take a look after a few minutes if the drivers are installed automatically properly under Sound Video and Game Controllers.

Wintv Hvr 1950 Drivers For Mac Catalina

If they still come back as 'unsigned' try the procedure again.

Prodinfo: get information on your Hauppauge TV tuner

Prodinfo.exe is a program you can run which will extract information about the WinTV product you have installed such as model and serial number, MAC address, revision, and features which can be used to identify the exact model of your product. The driver for the device must be installed in order to run Prodinfo.exe

HCWClear: remove the Hauppauge driver and applications from your PC

HCWCLEAR.exe is a program you run to remove all driver and files that were installed with the installation of the WinTV program.